Version 15.02.2023
HW CAM (V100) / (EF2L145/V20)
RL4-MBN4
P
a
g
e
9
2.3.
Connection – LVDS switch
Connect the female 10pin connector “To interface” of the LVDS switch to the video
interface’s male 10pin connector.
Connect the female 10pin connector of the factory harness to the male 10pin
connector “Monitor Cable In” of the LVDS switch (Pay attention to correct pin
arrangement).
Attention: The angle position of the factory female 10pin LVDS connector’s cable
may vary and moreover the connection isn’t non-interchangeable!
Pay attention to a correct connection of the 10 pins inside!
Connect the female 10pin LVDS connector to the previously become free 10pin LVDS
connector of the factory monitor
