Version 15.02.2023
HW CAM (V100) / (EF2L145/V20)
RL4-MBN4
P
a
g
e
11
2.4.1.
Special case – Vehicles with Comand APS NTG3 connection (e.g. W221 S-Klasse)
Connect the enclosed 10pin Power / CAN cable’s female10pin connector to the male 10pin
connector of the video interface.
Connect the single grey wire
„CAN LOW“
to the vehicle’s CAN low wire at pin11 of the
female 20pin connector (see digram and assignment table) and isolate the connection.
Connect the single blue wire
„CAN HIGH“
to the vehicle’s CAN high wire at pin1 of the
female 20pin connector (see digram and assignment table) and isolate the connection.
Connect the single red wire to stabile
+12V terminal 30
.
Connect the single black cable to the vehicle’s negative Ground.
No liability for vehicle wire colors and pin definition! Changes by the vehicle manufacturer
are possible. The given information must be verified by the installer.
Cable colour
Assignment
●
Yellow
CAN-LOW Pin 11
●
●
Yellow/White
CAN-HIGH Pin 1
