Version 15.02.2023
HW CAM (V100) / (EF2L145/V20)
RL4-MBN4
P
a
g
e
19
3.
Interface operation
3.1.
By Comand buttons
The knob of the Comand can be used to execute interface functions.
Long pull back (3 sec.) knob in centre console to switch the video source.
Each repetition will switch to the next enabled input. If all inputs are
enabled the order is:
Factory video
video IN1
video IN2
factory video
…
Inputs which are not enabled are skipped. If the audio cable is connected, when switching
from video IN1 to video IN2, also the sound will be switched.
Disabled inputs will be skipped.
Note: Switching by the knob of the Comand does not work in all vehicles!
3.2.
By external keypad
The interface’s external keypad can alternatively be used to switch the enabled inputs.
Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources.
Each press (approx. 2 sec) will switch to the next enabled input. If all inputs are enabled the
order is:
Factory video
video IN1
video IN2
factory video
…
Disabled inputs will be skipped.
Note: The interface switches after releasing the switch (after long pressure).
Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces switches from the factory video
to the front camera input and back to factory video.
