Version 15.02.2023
HW CAM (V100) / (EF2L145/V20)
RL4-MBN4
P
a
g
e
10
2.4.
Connection – 10pin Power / CAN cable
Power and CAN must be connected to the quadlock on the back of the head unit!
No liability for vehicle wire colors and pin definition!
Possible changes by the vehicle manufacturer. The given
information must be verified by the installer.
Connect the enclosed 10pin Power / CAN cable’s female10pin connector to the male 10pin
connector of the video interface.
Connect the single grey wire
„CAN LOW“
of the 4 cables to the vehicle’s CAN low wire and
isolate the connection
Connect the single blue wire
„CAN HIGH“
of the 4 cables to the vehicle’s CAN high wire and
isolate the connection
Connect the single red wire to stabile
+12V terminal 30
.
Connect the single black cable to the vehicle’s negative Ground.
Cable colour
Assignment
●
●
Red/Blue
+12Volt Permanent 15
●
Brown
Ground Pin 12
●
●
Brown/Red
CAN HIGH Pin 11
●
Brown
CAN LOW Pin 9
