Version 09.02.2023
HW: CAM(V100)(V20)
RL3-A15
P
a
g
e
11
2.5.
20pin RGB digital cable – connection and wiring
Connect the male beige-coloured
20pin connector of the 20pin RGB
digital cable to the female 20pin
connector of the daughter PCB.
Pay special attention to the cable’s
direction because its connectors
both seem to be identical. (Strictly
respect the lables
„MONITOR SIDE“
and
„BOX SIDE“
).
Position the daughter PCB at the
monitor’s rear-side and carefully
fold in the installed 40pin ribbon
cables into the monitor’s housing,
after leading out the grey coloured
40pin RGB digital cable at a suitable
place.
Fix the daughter PCB to the
monitor’s housing by using both
original screws.
