Version 09.02.2023
HW: CAM(V100)(V20)
RL3-A15
P
a
g
e
9
2.4.
Connection – ribbon cables
Remove the head-unit and further remove the original housing base plate on the rear side of
the monitor (4screws), to set free the 40pin ribbon cable.
Clip out the monitor’s original copper
coloured 40pin ribbon cable which is
connected at the head-unit
mainboard’s ribbon cable base and
connect it to the PCB’s outer
40pin ribbon cable merger.
Connect the daughter PCB’s pre-assembeled inner
40pin ribbon cable to the previously become free
ribbon cable base of the monitor mainboard.
Note: Heed the following warning notes
concerning installation of ribbon cables!
