Version 09.02.2023
HW: CAM(V100)(V20)
RL3-A15
P
a
g
e
12
2.6.
Connection – Head unit-Power
Connect the 20pin picture signal cable’s female 20pin connector to the male 20pin
connector of the video-interface.
Connect the female 12pin connector of the 12pin interface cable to the 12pin
connector of the video interface and the 10pin connector beside to the female 10pin
connector of the 10pin power cable.
Connect the yellow wire of the 10pin power cable to
+12V ACC
(Accessory power) or
+12V
S-contact
terminal 86s
(e.g. glove compartment illumination).
For the interface power supply, the purple wire of the 12-pin interface cable has also
to be connected to ACC (see following chapter).
Connect the single black wire of the 10pin power cable to vehicle’s negative ground.
