Navitron NT888G MK2, Руководство по эксплуатации

Страница: 30 / 77

NT888G MK2 AUTOPILOT OPERATING MANUAL
2.6 The LIMITS Menu / ROT Calibration (Continued).
To set maximum safe Rate of Turn:-
a) If not already in the Set Up Table, simultaneously press the “ CANCEL ”
and “ CONFIRM ” keys for 5 seconds until the Set Up Table is displayed
with a blue cursor highlighting the Set Up parameter currently selected.
b) Rotate the Autopilot Set Course Control to move the cursor to
parameter number 7 ( ROT MAXIMUM ).
c) Use the rotary (+/-) illum. control to set the maximum safe value of
ROT in
°/SEC (0.1-10) or °/MINUTE (6-600) .
Normal Operational Rate of Turn or Radius of Turn Setting:-
The required Rate of Turn for normal operational duties – up to the maximum safe
Rate of Turn value stored in the Set Up Menu – can be set (or changed) via the
LIMITS Menu.
NB. If ROT has not been selected in the CONTROLS Menu (i.e. RAD Turn Type
selected) the ROT setting in the LIMITS Menu will not respond to cursor
selection/adjustment.
To set the operational ROT value:-
a) Use the “ LIMITS ” key to enter the Limits Menu.
b) Use the “ LIMITS ” key again to select “ ROT°/S ” box followed by
flashing current value.
c) Use the rotary (+/-) illum. control to set “ ROT ” value required.
Display Mode (°/sec or °/min):-
Dependent upon operator preference, the Autopilot Control Unit display can show
the values of
Actual and Set ROT in °/min or °/sec as required.
To set display type (°/min or °/sec):-
a) Simultaneously press the “ CANCEL ” and
“ CONFIRM ” keys for 5 seconds until the Set
Up Menu is displayed with a black cursor
highlighting the Set Up parameter currently
selected.
or
b) Rotate the Autopilot Set Course Control to
move the cursor to parameter number 6 ( ROT
SCALING ).
c) Use the rotary (+/-) illum. control to set °/SEC
or °/MINUTE .