Optotune 6X System
Setup Guide
Created By: John Dong
Rev A
Reviewed By:
Date: 9/6/2019
Page 7 of 7
This document contains information proprietary and confidential to Navitar, Inc. Any disclosure, use or duplication of this document or any of the information contained
therein for other than the specific purpose for which it was disclosed is expressly prohibited except as Navitar, Inc. may otherwise agree to in writing.
5.
Adjust working distance until target is in best focus.
6.
Set Zoom to low magnification.
7.
Adjust Adapter Tube’s z‐axis until target is in best focus.
8.
Repeat Steps 4‐7 until low and high magnification is at best focus without needing further adjustments.
5.0
TROUBLESHOOTING
Some tips for when you are running into issues with the software.
5.1
A
PPLICATION IS
N
OT
D
ETECTING
C
ONNECTED
D
EVICES
1.
Double check that the device shows up your Operating System’s Device Manager. If it is not there, check the
connection.
2.
Ensure that no other applications that might be using the devices are open (Pixelink Capture for example).
3.
Open the Task Manager, and make sure that no other instances of the Navitar Device Control application are
running. If there are other instances, force close them.
5.2
A
PPLICATION IS
B
EING
S
LOW
/S
LOW
F
RAMERATE
1.
Open the Task Manager, and make sure that no other instances of the Navitar Device Control application are
running. If there are other instances, force close them.
2.
Try restarting the application. Make sure to wait a few seconds before starting the application again after closing
it.
3.
If camera framerate is slow, make sure camera is connected via USB3 port.
----- END OF DOCUMENT -----
