TECHNICAL DATA
Display data refresh rate:
every 5 seconds
Units of measurement:
%, Lit, m3, gal, cm, mm
Level display resolution:
1 %, 0 - 9999
Tank shape:
rectangle, round, custom
Temperature display:
-
30....+60 °C
Temperature display resolution:
0.1
0
C
Alarm mode of operation:
low level, high level, measurement error
Sound signal / Buzzer strength:
90 dB / 30cm
Relay output:
4 x relay, switching contacts 2 A/24 V
Relay mode of operation:
low level, high level, pump operation, measurement error
Antenna connection:
50 Ohm, SMA
Wireless sensor range:
up to 1 km or 3 km with optional YAGI antenna
Wireless frequency bands:
868 MHz
Operating temperature range:
-
10 ... +50 °C
Power supply voltages:
12-24 V DC
Power consumption:
up to 500 mA
Housing dimensions:
130 × 80 × 36 mm
Mousing material:
PC
– Polycarbonate
Weight:
320 g
Additional for models LW410XW/D and LW410XL/D:
4 - 20 mA output for tank 1 and tank 2:
4...20 mA, (outputs are not galvanically separated, common ground)
4 mA = 0 %
20 mA = 100%
3.6 mA = measurement error, no signal
Navis “LiveData” web interface URL:
https://level.navis-livedata.com
Wi-Fi packet transition interval:
1 minute per sensor, up to 4 per minute
Wi-Fi frequency band:
2,4 GHz
Wi-Fi range:
Up to 20 meters, depends on user network equipment
Additional for model LW410XL/D:
SD card (included):
micro SD formatted in FAT or FAT32 (recommended)
Log interval:
12 minutes
SD file generation:
daily logs with 12 minutes average data intervals
monthly logs with 24-hour average data intervals
new file is generated upon SD card insertion, or settings change
File types:
.csv (comma separated values)
Real time clock battery (preinstalled):
1 x 3 V CR2032 Lithium
Models:
•
LW410/D
– receiver/level display
•
LW410XW/D - receiver/level display with Wi-Fi connectivity
•
LW410XL/D - receiver/level display with Wi-Fi connectivity and SD logging
Compatible with wireless Navis level sensors:
wireless capacitance sensors: SC10, SC10/R
wireless hydro-static pressure sensors: SP10
wireless ultrasound sensors: SU10, SU11, SU12
OPTIONAL EQUIPMENT
1. Magnetic mounting brackets
2. Auxiliary antenna with 3 m cable, magnetic mounting
3. YAGI antenna
4. USB / micro SD adapter
5. Micro SD card
6. Signal repeater
1
2
3 4 5 6
WARRANTY (LIMITED)
The warranty period of NAVIS products is one year after the date of purchase. During the limited warranty period any defective
product will be repaired or replaced with a comparable product without charges. The claimed product will be repaired or replaced
only when returned to the store where it was purchased together with original invoice. Failure to follow these instructions may
invalidate the warranty. The limited warranty does not cover the battery or damage of any kind, including physical damage caused
accidentally or misuse of the product. NAVIS does not accept responsibility for any problems which may arise from applications
other than those the product was designed for. Any liability for direct or indirect damage caused by product failure is excluded.
V1 R060522
__________________________________________________________________________________________________________________________________________
NAVIS elektronika d.o.o.
, Poljska cesta 11, SI-1241 Kamnik, [email protected]
