NAVIOP Loop S, Руководство пользователя

Страница: 3 / 27

| 3
Preface | Loop S User Manual
Preface
Disclaimer
The manufacturer disclaims all liability for any use of this product in a way that may cause
accidents, damage or that may violate the law. This document may contain inaccuracies
or typographical errors. The user is liable for any use of the information contained in this
document.
The manufacturer retains the right to make changes to the product at any time which may
not be reflected in this version of this document. This document represents the product as at
the time of publication. The manufacturer reserve the right to make changes to specifications
without notice.
Copyright
Reproduction, even in part, of this documentation is prohibited without the express written
permission issued by NAVIOP S.R.L.
Copyright © 2019 NAVIOP S.R.L. All rights reserved.
Trademarks
Brands and product names mentioned in this documentation are acknowledged as
trademarks of their respective owners.
About this manual
This manual is a reference guide for installing and operating the Loop system.
Some features may not be activated or available for screenshots in the manual. As a result,
screenshots of menus and dialogs may not match the look of your unit.
Important text that requires special attention from the reader is emphasized as follows:
¼
Note:
Used to draw the reader’s attention to a comment or some important information.
!
Warning:
Used when it is necessary to warn personnel that they should
proceed carefully to prevent risk of injury and/or damage to equipment/
personnel.
General safety
•
All installation and repair work should be performed with care.
•
All waste must be handled and disposed of properly in compliance with applicable laws.
Compliance statements
This product complies with:
•
CE under EMC Directive 2014/30/EU
•
the requirements of level 2 devices of the Radio communications (Electromagnetic
Compatibility) standard 2017
!
Warning:
The user is cautioned that any changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.