Navini Networks, Inc.
Ripwave Wireless Broadband Access Card User’s Guide
060210_pv1.7_Ripwave Wireless Broadband Access Card User’s Guide_40-00292-00d(4.4.2)
he Signal
trength and
ignal Quality Bars
n “X” is positioned over the corresponding icon indicates the
connection between the PC and the Modem or between the Modem
and the Base Station is interrupted.
ioned over the
orresponding icon.
dicate how well your Card is receiving signals from the Base
Station.
e Signal Strength bar area graphically represents the
rength of the synchronization signal your Modem is receiving
om BTS. The strength of the signal is represented by a group of
eak
The Signal Quality bar area graphically represents the Signal-to-
Noise Ratio (SNR) received by your Modem. Again, the quality of
the signal is represented by a group of colored bars. The higher the
pile of bars goes, the better the SNR of the signal. The color of the
bars also gives an indication of the quality of the signal. Green
lines indicate an excellent signal or an SNR greater than 21.
Orange lines indicate a good signal or an SNR greater than or equal
The Icons, continued
T
S
S
A
If the connection between the PC and the Card or between the Card
and the Base Station is interrupted, an “X” is posit
c
Signal Strength and Signal Quality are dynamic bar areas that
in
In particular, th
st
fr
colored bars. The higher the pile of bars goes, the stronger the
signal is. The color of the bars also gives an indication of the
strength of the signal. Green lines indicate an excellent signal.
Orange lines indicate a good signal while red lines indicate a w
signal.
Page 20
