Navini Networks, Inc.
Ripwave Wireless Broadband Access Card User’s Guide
Accessing the
Internet
Removing Your
Card
Now that your Card is installed and your computer is on, you
should be able to access the Internet (that is, assuming you have
signed up with a Service Provider). To access the Internet, open the
web browser that is installed on your computer, (for example,
Netscape, Internet Explorer, etc.).
Before you store your PC in a computer case, you should remove
the Card from the PC. Also, turn the antenna to its original down
position. Leaving the Card in the PC or the antenna in the upright
position while storing the PC in a computer case may damage the
card or the antenna.
To properly remove the Card from your computer, you must first
stop the driver software. If you do not stop the driver software first,
the following box will appear:
To safely remove the Card, click on the Card icon indicated in the
following illustration. Depending on your computer’s setup, this
icon is probably located in the lower right-hand corner of your
computer.
Page 12
060210_pv1.7_Ripwave Wireless Broadband Access Card User’s Guide_40-00292-00d(4.4.2)
