Navigon 84 series, Руководство пользователя

Страница: 71 / 141

User’s manual NAVIGON 8410
Useful functions - 71 -
The (Record Track) symbol appears at the top right edge of the
screen throughout the recording.
The recorded route is saved in the
S
AVED
R
OUTES AND
T
RACKS
list
in KML data format. It can be loaded again from there at any time.
Stopping the recording
►
Tap on Options > Services > Stop Recording.
The recording is stopped. The recorded route is saved in the
S
AVED
R
OUTES AND
T
RACKS
list in KML data format. It can be loaded again
from there at any time.
Note:
Switching off the navigation device will only interrupt the track
recording. If you want to stop the recording, you must proceed as
described above.
Using a track for navigation
You can load saved tracks as part of planning a route. (Refer to
"Loading routes or tracks" on page 47)
Note:
All tracks that have been saved in KML data format are suitable
for route planning. Use
NAVIGON Fresh
in order to load tracks from
other suppliers onto your navigation system.
Note:
When you are navigating along a recorded track, any incoming
TMC messages will not be checked to see if they concern the track in
question.
10.4 Parking near the destination
When you get close to your destination, the (Parking) button
will appear on the display. This button also remains visible after you
have reached your destination as long as you stay close to the
destination and the map is not closed.
The following scenarios are imaginable:
Continuing on foot
You see a car park, park your vehicle and want to continue to the
destination on foot.
1. Tap the (Parking) button.
2. Tap on Pedestrian mode.