F. Navigation Function
-
How
to
navigate
03
F-
Navigation
Setup the path and navigation mode as described above. Turn
ON GPS by Hold [V]. Or if you want to have workout logged
then just press [S/S] to start workout. Then wait for GPS fix.
Meanwhile you can pick the active waypoint by press [V] to
switch to Goto screen.
Set Active Waypoint
In Goto screen, browse the waypoints up and down current path
with [S/S] and [L/R] buttons. The sequence number of waypoint
is shown at top right. Path name is at the 2nd line. Other
details of a waypoint are shown consecutively in lines 3 and 4
across 3 pages.
- Page 1 defines the time, date, and name of waypoint. Name of
waypoint is restricted to 10 characters long. Editing of waypoint
name can only be done in PC Master. Default name “WayptXX”
is assigned to a waypoint automatically by the watch when it is
marked manually or created by Smart Lap. Where XX is a
sequence number goes from 00 to 99.
- Page 2 defines the distance between current position and
heading to this waypoint if GPS has been fixed.
- Page 3 defines the longitude and latitude of this waypoint
Press [V] once again to go back to Navigation after the active
waypoint has selected.
Direction
Current
Speed
Way
point
Destination
Workout
Data
View
[V]
Path
Name
Way
point
No
.
Navigation
data
Way
Point
Data
View
Hold
[
V
]
Fixing
with
GPS
GPS
Fixed