C. Setting Up:
Fasten the Chest Strap on one’s chest
C-02
Note:
!
Wet the contacts with water or saliva can increase the conductivity.
!
Make sure that the contacts
.
!
!
Put the Chest Strap in the place within 3 meters from the Watch, otherwise the Watch
CANNOT receive the data from the Chest Strap.
make firm contact with the user's skin during
measurement
Clean the contacts occasionally by moist paper towel, and wipe it dry with dry paper
to remove grease.
1
4
2
3
Insert the connecter of the elastic bend
into hole located on the end of the chest
strap.
Center the Chest Strap against your chest
as high under breasts as is comfortable.
Adjust the Chest Strap with the elastic
band comfortably and allow for normal
breathing.
Twist the bend so that the whole connecter
is completely lodged on to the chest strap.
WARNING:
!
DO NOT adjust the Chest Strap too tight, it may hinder the blood circulation and breath.
!
Avoid doing any awkward motion during measurement, it will create an inaccuracy heart rate reading.
Lodge the free connector on to the
another end of the Chest Strap as
Step 1 and 2.
