BHM
01/21/15
NTV-DOC156
rB2
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
6 |
P a g e
13.
Optional:
Connect the remote eye to the port labeled
‘IR’
and leave it in clear view of the driver (often it can be stuck
inside a vent). This connection would be necessary if you
want to be able to adjust anything from the W204 interface’s
menu.
a.
While in any AV mode other than factory
(on the
display screen), press the
MENU
button
for
Menu 1
,
or
hold the
left arrow
to enter
MENU 2.
b.
To switch between AV modes, press the
‘OK’
button.
14.
Optional:
Connect the provided momentary toggle switch to the port on the W204
interface labeled
‘MODE’
. Pressing this switch with the ignition on will cycle the
screen modes as follows:
factory screen > NAVI (RGB) >
AV1 > AV2 > AV3 > factory screen
.
15.
Note:
All other included harnesses not mentioned in this manual are not needed for
most installations.
If you would like to know more about the full capability of this
interface, contact NAV-TV tech support at 561-955-9770. Additional features not
mentioned in this manual are not supported by NAV-TV at this time.