10 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. If you do
not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger entertainment only.
Q1. I can’t get into programming mode.
A1. Verify your CAN data wires are connected properly. Make certain you are in FM radio mode before you begin
programming, otherwise the cluster information might not display. Hold down the “MUTE” button until you see the display
options post on the cluster.
Q2. I’m getting no image at all on my factory screen.
A2. Verify your connections are correct, starting with the CAN data wires. Also check that the video RCA supplied is
been populated in the correct location.
Q3. When I try to force (front, rear) camera, nothing happens.
A3. Make certain you’ve enabled the options you want to use in the Nav-TV settings mode. Refer to page 7.
Q4. I hear no audio when my auxiliary source is playing on screen.
A4. You must run audio up into the center console AUX jack to get sound through the speakers in AUX mode.
Q5. I’ve added an aftermarket camera, when the camera image is displayed, video is scrambled.
A5. Swap the video & shield connections going to the radio.
FAQs
