7 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. If you do
not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger entertainment only.
Programming Tips:
Be certain you’re in
FM
radio mode
before attempting to program, otherwise the cluster information
may not display.
The UCT-13 will not program if a door is open. Close all doors before beginning.
If a door is opened while in programming mode, the info screen at the cluster will indicate as such
(overriding Nav-TV programming mode display). The Nav-TV programming mode will return momentarily
if nothing else is touched so that you may continue programming.
Nav-TV programming mode will time out (back to factory) after 15 seconds, however letting the system
timeout will NOT save any changed settings.
In order to save setting changes made in Nav-TV programming mode, you must scroll until you see ‘EXIT’
on the cluster and press enter with the tuning knob, or press the ‘BACK’ button.
Don’t forget to check out YouTube channel ‘NavTV1’ periodically for installation videos!
Programming sequence (cluster)
Selection option
Description
NAVTV Settings
TUNE-Next Item / Enter Change
Rotate TUNE knob to access different menus,
press knob inwards to enter/change setting
RVC
OEM / Retrofit
RVC: Rear view camera. OEM: Factory Dodge
installed camera only. Retrofit: Any
aftermarket camera.
Force RVC
OFF / ON
Enables option of forcing RVC.
F. CAM
OFF / ON
Enables option of installed front camera.
ADD NAV
OFF / ON
Enables option of installed Garmin NAV.
AUX VID
OFF / MANUAL / AUTO
Selects AUX mode setting. Manual: “SCREEN
OFF” button toggles video on & off.
Automatic: Video displays automatically
when sourcing radio to AUX mode.
EXIT
Exits programming mode and saves changes.
Press and hold
(15 seconds) to
enter NAV-TV
settings mode
UCT-13 Programming
While in NAV-TV
settings mode only:
Rotate in clockwise
direction (one detent at
a time!) to scroll
through options. Press
ENTER to change
setting.
