BHM
11/13/19
NTV-DOC351
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
SYNC3-RVC Operation
•
After all connections are made and
dip switches set properly
, start the vehicle. Placing
the vehicle in reverse will show the connected rear camera, with dynamic guidelines
overlaid onto the media screen.
•
If adding a front camera, this must be activated
by setting DIP SWITCH #2 to ON
. Forcing
this camera on at any time is performed by holding the
Voice Recognition (2 sec)
button
or pressing the phone
Hang-Up
button on the steering wheel (shown below).
•
The module will cycle through video modes in this order:
OEM>HDMI>AV1>OEM
, and
will only show inputs that are active. Use the same button action to return to OEM
screen.
Hold (choose one, 2 seconds)
Trucks
Explorer
Hold (choose one, 2 seconds)
Hold (2 seconds)
Transit
