BHM
11/13/19
NTV-DOC351
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
6 |
P a g e
Adding HD-LINK Adapter (HDMI Input, optional)
Follow the instructions below when adding the HDMI adapter (HD-LINK: KIT800) to enable
HDMI input to the OEM screen:
1.
Disconnect the main power plug from the SYNC3-RVC interface.
2.
Put dip switch #1 in the
DOWN
position.
3.
Reconnect the main power plug.
4.
Connect the
black wire
to ground (-) and the
red
wire
to ACC power (+) from the main power
connector on the
HD-LINK
adapter. The RCA’s on
this plug provide audio from the HDMI source.
5.
Activate the HDMI input by
holding
the
Voice
Recognition button (2 seconds)
or pressing the
Hang-Up
button once on the steering wheel.
