Toyota 3 and Toyota 3S Navigation System Installation
2 |
P a g e
WARRANTY DISCLAIMER NOTICE!
Radio removal, disassembly, installation of
Navigation Electronics, and Radio re-assembly / re-installation is the responsibility of
the installer. It is recommended that you contact a professional installer that is
experienced with proper work methods involving electronics and knowledgeable of
specific procedures for radio disassembly, Navigation Electronics installation, and re-
assembly / re-installation of the Radio Head Unit in the vehicle.
INSTALLATION
DAMAGE TO THE VEHICLE RADIO HEAD UNIT IS EXPRESSLY NOT COVERED UNDER
THE PRODUCT WARRANTY.
To avoid dangerous distractions that may lead to an accident, the driver should
never operate the system while the vehicle is in motion. Before installing the
product, the seller should inform the end-user of proper use and compliance with
the proper instructions and all states and federal laws.
Before beginning your installation, familiarize yourself with the installation
instructions and the Navigation system components.
CAUTION:
It is advisable to disconnect the negative battery cable for 3 minutes
before beginning installation, to avoid unintended air bag deployment. Note and
record any anti-theft radio codes prior to disconnecting.
Installation
This is a general installation guide for navigation system. There will not be any
instruction on dash / radio removal. Please refer to Toyota service manual for
removing radio from dash.
* The following steps are for ALL radios types, please follow these steps
accordingly. You will be notified for specific steps later regarding Toyota 3 and
Toyota 3S system. *
NTV-DOC217
