manualshive.com logo in svg
background image

46

MAINTENANCE

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do 

the necessary tasks.

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that 

regular maintenance is done. Worn or damaged components must be repaired or replaced immediately. 

Only manufacturer supplied components can be used to maintain and repair the equipment.
 If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased 

in US/Canada, contact Customer Service for replacement labels. If purchased outside US/Canada, contact 

your local distributor for them.

  

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the 

power cord from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the 

machine. Place the power cord in a secure location.

Daily:

 

Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not 

use if found in this condition. Repair or replace all parts at the first sign of wear or damage, except 

for the Walking Deck. The Walking Deck is designed for wear on both sides of it. If only one side of 

the Walking Deck is worn, a replacement Deck is not required. It is recommended that a qualified 

service technician is used to flip the Walking Deck. After each workout, use a damp cloth to wipe 

your machine and Console free of moisture.

With the Walking Deck lowered, if an edge of the Walking Belt can be seen, adjust it 

until the edge is not viewable.

Note:

 Avoid excessive moisture on the Console.

Weekly:

 

Check for smooth roller operation. Wipe the machine to remove dust, dirt, or grime. 

Do not remove the Motor Control Board (MCB) Cover. Dangerous voltages and moving 

parts are present. The components are serviceable only by approved service personnel 

or by following service procedures supplied by Nautilus, Inc.

Note:

 Do not use petroleum based products.

Monthly  

or after 20 hours:

 

Make sure all bolts and screws are tight. Tighten as necessary. 

Quarterly:

 

Or after 25 hours—Lubricate the walking belt with a silicone-based lubricant.

Silicone lubricant is not intended for human consumption. Keep out of reach of 

children. Store in a safe place.

 NOTICE:

   Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free 

of moisture.

Cleaning

  

To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before 

cleaning, maintaining or repairing this machine.

Wipe the treadmill down after each use to keep the treadmill clean and dry. It may be necessary to use a mild detergent at 

times to remove all dirt and salt from the belt, painted parts and the display.

 

NOTICE:

    To prevent damage to the finish of the machine or Console, do not clean with a petroleum based solvent. 

Do not apply too much moisture to the Console.

Содержание T618

























































Отзывы: