24
7. Stand to one side of the treadmill. Place your front foot so it pins the Base
Assembly. Grasping the Side Handrail, carefully pivot the treadmill rearward
until it is balanced fully on the transport wheels. Be sure not to pivot the
machine too far. Hold the treadmill in the balanced position.
This step may require two persons on each side of the treadmill. The
treadmill is heavy and can be awkward. Make sure that your own
physical strength is capable of pivoting the machine.
Always wear fully enclosed shoes when moving this machine. Do not
move the machine with bare feet or only wearing socks.
Do not use the Console or lifted Walking Deck to pivot or move the
treadmill. Injury to you or damage to the machine can occur.
Keep clear of the movement path of the lifted Walking Deck.
8. Grasping the Side Handrail and the front of the Upright, safely roll the treadmill to the desired location.
The treadmill is heavy and can be awkward. Make sure that your own
physical strength is capable of moving the machine.
Place the machine on a clean, hard, level surface, free from unwanted
material or other objects that may hamper your ability to move freely.
A rubber mat should be used below the machine to prevent the
release of static electricity and protect your flooring.
Do not put objects in the path of the walking deck when lowered.
NOTICE:
Move the machine carefully so that it does not hit other ob-
jects. This can damage the Console operation, the treadmill,
or the area around the machine.
9. Safely lower the treadmill into the desired position. Be sure there is adequate
space for the machine before lowering it.
10. Prior to use, refer to the “Unfolding the Machine” procedure in this manual.
Unfolding the Machine
1. Make sure there is sufficient space to lower the walking deck.
Keep a minimum clearance behind the machine of 79” (2 m) and 24” (0.6 m) on each side. This is the
recommended safe distance for access, movement and emergency dismounts from the machine.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may
hamper your ability to move freely with a sufficient clear workout area. A rubber mat below the machine is
recommended to prevent electrostatic discharge and protect your floor.
Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration
the height of the user and the maximum incline of the deck.
2. Make sure there is no object on or around the treadmill to spill or cause blockage from the fully unfolded position.
3. Move to the right side of the machine. Press and hold the plastic Deck Release Handle under the end of the right side
rail. While grasping the Support Bar, release the deck handle.
