Nautilus Schwinn 450, Руководство по обслуживанию

Страница: 7 / 23

7
Replacing the Static Handlebar Assembly
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and the
machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure location.
Tools Required: #2 Phillips Screwdriver, 4 mm hex wrench,
10 mm wrench
1. Using a #2 Phillips screwdriver, remove the 4 indicated
screws from the Console Assembly.
2. Gently lift the Console Assembly and disconnect the Con -
sole Cable and the Heart Rate Cable.
Note: Do not crimp the cables. Do not allow the cables to
fall down the Console Mast. Use a rubber band or wire tie.
3. Using a 4 mm hex wrench and a 10 mm
wrench, remove the 4 indicated bolts and
remove the Static Handlebar.
Note: Do not crimp the Console Cable when
removing the Static Handlebar.
Do not allow the Console Cable to fall into the
Console Mast.
4. Installation is the reverse procedure.
5. Dispose of the old parts.
6. Inspect your machine to ensure that all
hardware is tight and components are properly
assembled.
Do not use until the machine has been
fully assembled and inspected for
correct performance in accordance
with the Owner’s Manual.
#2
*
X4
X4
10 mm
X4
4mm