Nautilus Schwinn 450 Скачать руководство пользователя страница 22

Страница: 22 / 23

Replacing the Power Inlet Assembly

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and the

machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure location.

Tools Required: 15mm socket and ratchet

1. Perform the removal steps of “Replacing the Pedals and Legs” Procedure.

2. Perform the removal steps of “Replacing the Upper and Lower Handlebars” Procedure.

3. Using a 15mm socket, remove the indicated Lock Nut (Item A) from the AC Inlet.

4. Perform the removal steps of “Removing the Shrouds” Procedure.

5. Disconnect the Power Inlet Assembly (Item B) from the wiring harness.

Note:

Do not crimp the cable.

6. Remove the Power Inlet Assemby and replace with the new assembly.

7. Installation is the reverse procedure.

Содержание Schwinn 450
























Результаты поиска

Содержание Schwinn 450

Отзывы:

Похожие инструкции для Schwinn 450

Бренды по названию

Популярные бренды

Nautilus Schwinn 450, Руководство по обслуживанию

Результаты поиска

Содержание Schwinn 450

Отзывы:

Похожие инструкции для Schwinn 450

Бренды по названию

Популярные бренды