Nautilus Schwinn 450, Руководство по обслуживанию

Страница: 19 / 23

19
Replacing the Brake Assembly
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and the
machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure location.
Tools Required: 6 mm hex wrench , 10 mm wrench, (2) 13 mm (1/2”) wrench, 17 mm wrench
1. Perform the removal steps of “Replacing the Pedals and Legs” Procedure.
2. Perform the removal steps of “Replacing the Upper and Lower Handlebars” Procedure.
3. Perform the removal steps of “Removing the Shrouds” Procedure.
4. Insert a piece of cardboard between the Brake Magnet
(Item B) and the Flywheel (Item F).
Note: Be sure the cardboard covers all of the Brake Magnet.
5. Disconnect the Speed Sensor Cables (Item A).
Note:
Do not crimp the cables.
6. Pull the lower Console Cable (Item D) from the Frame Assembly.
Note:
Do not crimp the cables.
7. Count the number of exposed threads above the Upper Snap Nut
(Item E). This will assist with resetting the Servo Motor to the factory
specifications.
8. Remove the bolt (Item F) and upper Snap Nut from the Servo Motor/
Brake Assembly.
9. Remove the bolt (Item H) from below the Flywheel.
A
H
D
C
F
B
G
E