Nautilus R618 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 60

background image

42

Replace the Data Cable in Console Mast

on the Nautilus

™

U618 Bike

Skill Level: II

8012579.101518.B

Replacement Procedure

NOTICE:

This document provides instructions for the replacement of the Data Cable in the Console Mast on the Nautilus

™

U618

Upright Bike.

If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside

US/Canada). To find your local distributor, go to: www.nautilusinternational.com

Tools Required (not included)

#2 Phillips screwdriver

5’ (152 cm) length of string

Small flathead screwdriver

6mm hex key

™

™

Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S.

www.nautilusinternational.com | © 2016 Nautilus, Inc. | Nautilus and the Nautilus logo are trademarks owned by or licensed to Nautilus, Inc. Inc., which are registered or otherwise protected by

common law in the United States and other countries. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

Read and understand the Service Manual before working on the machine. Failure to obey the instructions and safety warnings could

cause injury to the service technician or bystanders.
Disconnect all power to the machine before you service it.

•  Keep bystanders and children away from the product being serviced at all times.
•  Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
•  Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do

maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.

• If replacement parts are necessary, use only genuine replacement parts and hardware supplied by Nautilus. Failure to use

genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when

doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged,

replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels. If purchased outside US/

Canada, contact your local distributor for them.

• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
• Do not put the machine back in service until all shrouds, instructions, warning labels and correct functionality have been

verified and tested for correct performance.

«
...
40
41
42
43
44
...
»

Содержание R618





























































Отзывы:

Нет отзывов

Похожие инструкции для R618

ergo_bike medical8

Бренд: Daum electronic Страницы: 24

Бренд: Abilica Страницы: 34

Бренд: ONE FITNESS Страницы: 35

Бренд: Evo Страницы: 19

Бренд: Bowflex Страницы: 36

Бренд: Xterra Страницы: 20

Бренд: Xterra Страницы: 53

Бренд: PaceMaster Страницы: 29

Бренд: Spirit Страницы: 52

Triathlon X-Class 510

Бренд: Ironman Fitness Страницы: 27

Бренд: Ironman Fitness Страницы: 22

WESLO PURSUiT 795i

Бренд: ICON Health & Fitness Страницы: 8

Stream Adventure

Бренд: Abilica Страницы: 34

IN 10893 inCondi UB30m

Бренд: Insportline Страницы: 25

Бренд: Tunturi Страницы: 34

Cardio Fit C30 Cross

Бренд: Tunturi Страницы: 44

Cardio Fit mini bike M35

Бренд: Tunturi Страницы: 64

Бренд: Tunturi Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды