Nautilus R618 Скачать руководство пользователя

Страница: 6 / 60

Moving the Bike

To move the upright bike, carefully tilt the Handlebars toward you while pushing the front of the bike downward. Push the

bike to the desired location.

NOTICE:

Be careful when you move the bike. Abrupt motions can affect the computer

operation.

Bluetooth

Connectivity with the “Nautilus Trainer™” Fitness App

This fitness machine is equipped with Bluetooth

connectivity and can wirelessly sync with the “Nautilus Trainer™”

Fitness App on supported devices. The Software App syncs with your fitness machine to track total calories burned, time,

distance, and more. It records and stores every workout for quick reference. Plus, it automatically syncs your workout data

with MyFitnessPal

and Under Armour

Connected Fitness to make hitting your daily calorie goal easier than ever! Track

your results and share with friends and family.

1. Download the free Software App, named Nautilus Trainer™. The software app is available on the App Store and

Google Play™.

Note:

For a complete list of supported devices, review the software app on the App Store or Google Play™.

2. Follow the instructions on the Software App to sync your device to your exercise machine.
3. To sync your workout data with MyFitnessPal

or Under Armour

Connected Fitness, click on the desired program and

Note:

The “Nautilus Trainer™” Fitness App will automatically sync your workouts after the initial syncing.

Workout with Other Fitness Apps

This fitness machine has integrated Bluetooth

connectivity which allows it to work with a number of digital partners. For

our latest list of supported partners, please visit:

www.nautilus.com/partners

USB Charging

If a USB Device is attached to the USB Port, the Port will attempt to charge the Device.

Note:

Depending on the amperage of device, the power supplied from the USB Port may not be enough to operate the

Device and charge it at the same time.

Содержание R618





























































Результаты поиска

Содержание R618

Отзывы:

Похожие инструкции для R618

Бренды по названию

Популярные бренды

Nautilus R618, Руководство по обслуживанию

Результаты поиска

Содержание R618

Отзывы:

Похожие инструкции для R618

Бренды по названию

Популярные бренды