Nautilus NS-700, Инструкция по сборке, Страница: 7 / 25

6
step
3
Step #3 Materials:
# Component Qty
17 Pec Fly Mount 1
18 Pec Fly Cam 2
19 Left Pec Fly Arm 1
20 Right Pec Fly Arm 1
21 Pec Fly Handle 2
37 Pec Fly Pulley Bracket 1
67 Plastic Cap 4
78 Hex Bolt - 3/8" x 3 1/4"L 2
79 Hex Bolt - 3/8" x 3"L 2
87 Cap Head Allen Screw
1/4" x 1/2"L with thread lock
2
93 1 11/32 x 1/2" Flat Washer 4
95 3/8" Flat Washer 8
96 1/2" Lock Nut 4
97 3/8" Lock Nut 4
99 Shim Washer 4
NS-700
A.
Attach Pec Fly Pulley Bracket (37) to Leg Extension Frame (8)
using the hardware shown. Tighten hardware securely.
B.
Attach Pec Fly Mount (17) to Main Base (9) using the hardware
shown. Tighten hardware securely.
C.
Slide Pec Fly Cam (18) onto Left Pec Fly Arm (19) paying close
attention to the orientation shown above. Attach the Left Pec Fly
Arm (19) to the Pec Fly Mount (17) using the hardware shown.
Tighten hardware securely making sure that the Pec Fly Arm can
rotate freely.
D. Repeat Step C using Right Pec Fly Arm (20).
E.
Install Pec Fly Handle (21) in Left Pec Fly Arm (19) using the
hardware shown. Tighten hardware securely making sure that the
Pec Fly Handle (21) can rotate freely. Install Cap Head Allen
Screw (87) to Pec Fly Handle (21) as shown. Tighten firmly.
NOTE: Make sure that the path of the Pec Fly Handle has a
similar path shown in the TOP VIEW.
F.
Repeat Step E using the Right Pec Fly Arm (20).
G. Install Plastic Cap (67) in the four locations shown. The Plastic
Cap (67) should snap into place locking around the Shim Washer (99).