Nautilus NS-700, Инструкция по сборке, Страница: 19 / 25

NS-700
18
step
14
Attach Accessories
A. Attach the Handles, Lat Bar, Ankle Cuff, and Ab Strap to the
cable ends using the Cable Clips.
Lubrication and Final Check
A. Lubricate Guide Rods and Guide Tubes using a silicon based
lubricant.
B. Carefully inspect all cables and insure that they are properly
seated on the pulleys and that they pass between the cable stops
and pulleys.
C. Double check all hardware and make sure everything is tightened
properly.
Cable Tensioning
A. Tighten the Cable System using a combination of five adjustment
locations. These locations are the Double Floating Pulley
Brackets, the Selector Rod Top Plate Assembly, the Top Weight
Pulley Housing, the Set Screws on the Leg Extension Cams, and
the Leg Extension Tensioner Pulley.
B. After the cables are tensioned, load the gym with as high a
weight as you feel comfortable with and pull each cable several
times to set and stretch the cables.
C. After the cables are set and stretched, the Cable System may
need to be re-tensioned. Tension the cables as described in Step A.
D. The cables may need to be tensioned periodically as they may
stretch slightly over time.