Nautilus NS-600, Руководство по сборке

Страница: 14 / 19

77
74
78
74
60
55
4"L
Cable #1 - Low Row
Hex Bolt 3/8" x 4"L
3/8" Flat Washer
3/8" Lock Nut
Pulley Spacer 1"L
A. Remove the lower Pulley from the Double Floating Pulley Bracket (31). Loop
Cable #3 (55) around the Pulley and re-install the Pulley as shown. Tighten
hardware firmly.
B. Wrap Cable #3 (55) under the Cable Housing (9) and attach the termination to
the Rear Frame using the hardware shown in detail A. DO NOT OVERTIGHTEN.
NOTE: Make sure to route Cable through the hole in the Pulley Mount tube.
NOTE:
This Cable termination is used for exercise attachments such as the NS-75. If
an attachment is used, do not install Cable Housing (9).
Please refer to attachment instructions for installation.
TM
NS-600
14
Step #9 Materials:
step
9
#
Description
Qty.
1
1
2
1
1 55
60
74
77
78
31
9
A
C
B