Nautilus NS-600, Руководство по сборке

Страница: 13 / 19

77
80
81
74
63
54
44
30
64 2 1/4"L
2 3/4"L
Pec Fly Double Floating Pulley Bracket
4 1/2" Pulley
Cable #2 - Mid-Pulley Cable
Hex Bolt 3/8" x 2 3/4"L
Hex Bolt 3/8" x 2 1/4"L
3/8" Flat Washer
3/8" Lock Nut
Step Spacer 1"H
Step Spacer 21/32"H
C. Attach looped end of Cable #2 (54) to the Pulley Mount bracket using the hardware
shown in detail A.
D. Route Cable #2 (54) around the 4 1/2" Pulley located on the Leg Extension
assembly and around the 4 1/2" Pulley on the Pulley Mount Bracket. Proceed by
routing the Cable around the lower Pulley on the Double Floating Pulley Bracket
(30) as shown.
E. Route Cable #2 (54) around the 4 1/2" Pulley on the Pec Fly Double Floating Pulley
Bracket (30). Continue by routing Cable over the 3 1/2" Pulley in the bracket on the
Front Upright and over the 4 1/2" Pulley adjacent to it.
TM
NS-600
13
Step #8 Materials:
step
8
#
Description
Qty.
1
2
1
2
1
2
3
2
2 30
44
54
63
64
74
77
80
81
F. Re-install the Ball, Washer, and U-Bracket to the end of the cable. Be sure that the
rubber o-ring is in its original position.
B. Remove the Ball, Washer, and U-Bracket from one end of Cable #2 (54).
A. Attach Two 4 1/2" Pulleys (44) to the brackets shown in detail A using the hardware
shown. Tighten hardware securely.
A
B
C
91.5" (2325mm)