Nautilus E626 Скачать руководство пользователя

Страница: 6 / 62

Troubleshooting

Condition/Problem

Things to Check

Solution

No display/partial display/

unit will not turn on

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet.

Check connection on

console

Connection should be secure and undamaged. Replace

adapter or connection at unit if either are damaged.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or other-

wise damaged. Replace Console if damaged.

Console Display

If Console only has partial display and all connections are fine,

replace the Console.
If the above steps do not resolve the problem, contact your

local distributor for further assistance.

Unit operates but Contact

HR not displayed

HR cable connection at

Console

Be sure cable is connected securely to Console.

Sensor grip

Be sure hands are centered on HR sensors. Hands must be

kept still with relatively equal pressure applied to each side.

Dry or calloused hands

Sensors may have difficulty with dried out or calloused hands.

A conductive electrode cream (heart rate cream) can help

make better conduct. These are available on the web or at

medical or some larger fitness stores.

Handlebar

If tests reveal no other issues, Handlebars should be replaced.

Unit operates but

Telemetric HR not

displayed (U626 only)

Chest Strap (optional)

Strap should be “POLAR®” compatible and uncoded. Make

sure strap is directly against skin and contact area is wet.

Check User Profile

Select the Edit User Profile option for the User Profile. Go to

the WIRELESS HR setting and make sure that the current

value is set to ON.

Interference

Try moving unit away from sources of interference (TV, Micro-

wave, etc).

Replace Chest Strap

If interference is eliminated and HR does not function, replace

strap.

Replace Console

If HR still does not function, replace Console.

Unit operates but

Telemetric HR displayed

incorrectly (U626 only)

Interference

Make sure that the HR receiver is not blocked by a personal

electronic device in the left side of the media tray.

No speed/RPM reading,

Console displays “Please

Pedal” error code

Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check magnet position

(requires shroud removal)

Magnet should be in place on pulley.

Check Speed Sensor

(requires shroud removal)

Speed sensor should be aligned with magnet and connected to

data cable. Realign sensor if necessary. Replace if there is any

damage to the sensor or the connecting wire.

Содержание E626































































Результаты поиска

Содержание E626

Отзывы:

Похожие инструкции для E626

Бренды по названию

Популярные бренды

Nautilus E626, Руководство по обслуживанию

Результаты поиска

Содержание E626

Отзывы:

Похожие инструкции для E626

Бренды по названию

Популярные бренды