Nautilus E626 Скачать руководство пользователя

Страница: 55 / 62

Replace the Crank Assembly (Drive Pulley)

on the Nautilus

U624/R624 (Model Year 2014) Bikes

Skill Level: III

8008344.040115.A

Replacement Procedure

Nautilus, Inc., , www.NautilusInc.com - Customer Service: [email protected] | © 2014 Nautilus, Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or other-

wise protected by common law. |

ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

NOTICE:

This document provides instructions for the replacement of the 1-piece Crank Assembly (Drive Pulley) on the Nautilus

U624 Upright Bike and

R624 Recumbent Bike.

If you need assistance, please contact your local distributor. To find your local distributor, go to: www.nautilusinternational.com

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings

on this machine.

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on

this machine.

WA R N I N G

AT T E N T I O N

D A N G E R

IMMEDIATE ACTION REQUIRED

C A U T I O N

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and

wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure location.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings

could cause injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps

involving these components. Do not try to do heavy or awkward steps on your own.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts

can cause a risk to users, keep the machine from operating correctly and void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing

maintenance or replacing components. If necessary request replacement warning stickers or placards from from your local distributor.

• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct

performance.

• This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users may

come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices,

such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this equipment. Please consult

the “Safety Warning Labels and Serial Number” section in the Owner’s Manual to determine the location of the magnets on this product.

Tools Required (not included)

Phillips

screwdriver

Needlenose

pliers

Small flathead screwdriver

32mm open end wrench

adjustable

wrench

Pedal wrench

Safety goggles or other eye protection

Содержание E626































































Результаты поиска

Содержание E626

Отзывы:

Похожие инструкции для E626

Бренды по названию

Популярные бренды

Nautilus E626, Руководство по обслуживанию

Результаты поиска

Содержание E626

Отзывы:

Похожие инструкции для E626

Бренды по названию

Популярные бренды