background image

6

SPECIFICATIONS

Before Assembly 

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a 

hard, level surface. Allow a workout area of a minimum 76” x 120” (193 cm x 305 cm). Be sure that the workout space 

you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline 

of the elliptical machine.

Basic Assembly Tips

Follow these basic points when you assemble your machine:

•  Read and understand the “Important Safety Instructions” before assembly.
•  Collect all the pieces necessary for each assembly step.
•  Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-

wise) to loosen, unless instructed otherwise.

•  When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
•  The assembly can require 2 people.

Maximum User Weight:

   300 lbs. (136 kg)

Machine Weight:

  

173.3 lbs. (78.6 kg)

Power Requirements:

  

  Operational Voltage:  120V AC

  Operating Current:  2 A

Regulatory Approvals:

   UL listed, Rated 120V AC, 60Hz Input, 2 A.

This product, its packaging, and components contain chemicals known to the State of California to cause cancer, 

birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you 

would like additional information, please refer to our website at www.nautilus.com/prop65.

63.2”

(160.5 cm)

71.5”

(181.7 cm)

26.7”

(67.7 cm)

Содержание E616

















































Отзывы: