1
Nautilus NS700X
# Component
Qty
38 Locking Roller Bar
1
39 Roller Bar
1
40 Plastic Washer
2
41 PU Roller
2
42 8”L Foam Roller
2
43 PU Roller End Cap
2
44 Round End Cap
2
Step 6 Components:
Procedure:
A. Slide Roller Bar (39) through the Leg Extension Tube. Either of the bottom two holes
can be used depending on the best fit for the user.
B. Slide a Plastic Washer (40) followed by a Foam Roller (42) on the Roller Bar (39).
Press the Roller End Cap (44) firmly into the Roller Bar (39). Repeat for the opposite
side.
C. Slide the Locking Roller Bar (38) through the Leg Extension Tube as shown making
sure that it is centered. Slide the Eccentric Roller (41) on the Locking Roller Bar
(38). Press the Locking Roller End Cap (43) into the Locking Roller Bar (38). Repeat
for the opposite side making sure that the Eccentric Rollers are aligned.
ASSEmBLY
STEP 6