Nautilus Be strong NS 700X, Инструкция по сборке

Страница: 10 / 26

10
# component Qty
17 Pec Fly Mount 1
18 Pec Fly Cam 2
19 Left Pec Fly Arm 1
20 Right Pec Fly Arm 1
21 Pec Fly Handle 2
37 Pec Fly Pulley Bracket 1
67 Plastic Cap 4
78 Hex Bolt - 3/8” x 3”L 2
87 Cap Head Allen Screw
1/4” x 1/2”L with thread lock 2
93 1 11/32 x 1/2” Flat Washer 4
95 3/8” Flat Washer 8
96 1/2” Lock Nut 4
97 3/8” Lock Nut 4
99 Shim Washer 4
Step 3 Components: Procedure:
a. Attach Pec Fly Pulley Bracket (37) to Leg Extension Frame (8) using the hardware shown.
Tighten hardware securely.
B. Attach Pec Fly Mount (17) to Main Base (9) using the hardware shown.
Tighten hardware securely.
c. Slide Pec Fly Cam (18) onto Left Pec Fly Arm (19) paying close attention to the orientation
shown above. Attach the Left Pec Fly Arm (19) to the Pec Fly Mount (17) using the hardware
shown. Tighten hardware securely making sure that the Pec Fly Arm can rotate freely.
D. Repeat Step C using Right Pec Fly Arm (20).
e. Install Pec Fly Handle (21) in Left Pec Fly Arm (19) using the hardware shown. Tighten
hardware securely making sure that the Pec Fly Handle (21) can rotate freely. Install Cap
Head Allen Screw (87) to Pec Fly Handle (21) as shown. Tighten firmly.
NoTe: Make sure that the path of the Pec Fly Handle has a similar path shown in the TOP VIEW.
f. Repeat Step E using the Right Pec Fly Arm (20).
G. Install Plastic Cap (67) in the four locations shown. The Plastic Cap (67) should snap into place
locking around the Shim Washer (99).
ASSEmBLY
STEP 3