Nautilus Be Strong Commercial Series U916, Инструкция по сборке, Страница: 10 / 16

10
assembly guide
Step 2:
Locate the following for this step:
Parts:
• Handlebar (E)
Hardware:
• Ref #6 Allen Head Bolt M8x20 Qty. 4
• Ref #7 Spring Washer M8 Qty. 4
Tools:
• 6mm Allen Wrench
2-1 Connect the attached long Wire Tie (L) to the
handlebar cables (M) and use it to pull the cables
out through the Mast (B) as shown in fig 3.
Discard the Wire Tie after use.
2-2 Align the Handlebar with the holes in the Mast.
2-3 Install and completely tighten the hardware.
Figure 2:
E
7
B
6
L
R