Nautilus Hyosung MX5300CE, Руководство по обслуживанию

Страница: 82 / 177

Chapter6. Safe Unit Service Manual
6-4 ©
Nautilus Hyosung, Inc.
All Rights Reserved.
ELECTRONIC COMBINATION LOCK
▶ ELECTRONIC COMBINATION LOCK
1. USER CODE
▪ Open Lock
▪ Change Code
2. WRONG TRY PENALTY
▪ Four (4) consecutive invalid codes initiates five minute delay period.
3. LOW BATTERY WARNING
▪ Repeated audio and visual signal (LED flashing and repeated beeping) during
opening indicates battery low.
4. AUDIO AND VISUAL SIGNAL
▪ Double signal (LED flashes and unit beeps) indicates entry is valid or accepted.
▪ Triple signal indicates invalid or not accepted.
5. OPENING THE LOCK
1) Enter valid six (6) digit code.
2) The lock will signal a valid code entry with a double signal.
3) Within four (4) seconds, turn handle to the open position.
4) Pull door open.
▪ Invalid Code Entry - Lock will signal three (3) times.
6. WRONG TRY PENALTY
▪ Entry of four (4) consecutive invalid codes starts a 5-minute delay period.
- LED flashed red at five (5) second intervals.
▪ At the end of the delay period, two more consecutive invalid codes will restart an
additional 5-minute delay period.
7. CHANGING YOUR CODE
ALWAYS PERFORM THIS OPERATION WITH THE DOOR OPEN
1) Enter “zero” six times.
2) Enter your existing six (6) digit code one time.
3) Enter your NEW six (6) digit code two times.
4) If a mistake is made wait thirty (30) seconds and repeat steps 1) – 3)
5) Test lock operation several times before closing the door.
▪ Valid Code Entry - Double signal after valid six (6) digit code is entered.
▪ Invalid Code Entry - Triple signal and old code is still valid.
8. BATTERY LOW WARNING
▪ Repeated beeping during an opening indicates that the battery is low and needs
immediate replacement.
▪ Uses one (1) 9-Volt Alkaline Battery. LA GARD recommends the use of Duracell™
or Everready™ Alkaline batteries. If battery is depleted and will not allow lock to
open, simply follow instructions below.