Nautilus Hyosung MX5300CE Скачать руководство пользователя страница 6

Страница: 6 / 177

Service Manual Chapter1. Preface

Nautilus Hyosung, Inc.

1-1

Purpose

▶

This manual is produced to provide the MX5300CE maintenance guide for field

technician.

Audience

▶

This manual is for persons related to maintenance MX5300CE in branches of banks,

such as field technician and repair center engineer, to work efficiently and conveniently.

Supported Information

▶

If any question or error occurs while maintenance MX5300CE in compliance with this

manual, please contact maintenance staffs of Nautilus Hyosung.

For the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses

and telephone numbers provided separately.

What is in This Manual

▶

This manual contains all information needed for normal operational use.

This manual contains Unit Specifications, Opening & Closing Procedures, Operator
Functions (Supervisor Screen), Error Recovery and etc.

Some of the information in this manual may be subsequently updated by the bank’s
needs or the improvement by Nautilus Hyosung.

Содержание MX5300CE





































































































































































Результаты поиска

Содержание MX5300CE

Отзывы:

Бренды по названию

Популярные бренды

Nautilus Hyosung MX5300CE, Руководство по обслуживанию

Результаты поиска

Содержание MX5300CE

Отзывы:

Бренды по названию

Популярные бренды