manualshive.com logo in svg

Nautel VX150, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Nautel VX150 Скачать руководство пользователя страница 64

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 1.0  2022-12-08

PAGE 2.2.47

• In the Days of the Week section, select the days of the week on which the rule will apply.

• In the Time section, set the start (From:) and end (To:) times (hours and minutes) for the 

rule. Use the Repeat: field to establish a repeating cycle for the rule (e.g., every 24 hours).

• Unless you edit other rules first, you cannot select a date that occurs before the start of the 

previous rule or after the start of the following rule.

• Click the Save button to store the rule in the scheduler, the Cancel button to return to the 

Scheduler page or the Delete button to delete the rule.

When Scheduler: OFF appears, the transmitter will stop following the schedule and the active preset 
will be the preset that was operating when the scheduler was disabled.

Figure 2.2.25: Edit Rule page

Содержание VX150




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды