Nautel VS300, Руководство по эксплуатации и обслуживанию

Страница: 187 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-172 Issue 8.0 2016-03-01
Figure 2.146: Site Control Rule Editing Window
• In the
Name
section, enter a name for the rule. This will display on the Site Control
page, as well the Logs page, when triggered.
• In the
Severity
section, use the drop-down menu to select Low, Medium or High. The
selected severity level will display on the Status page and Events Log. See Figure 2.14 on
page 2-27 for a description of the severity levels for logged events.
• In the
Delay
section, use the drop-down menu to select the time delay after activation
that the site control rule will take effect (i.e., be asserted). Select Immediate, 1 Sec, 2 Sec,
5 Sec, 10 Sec, 30 Sec or 60 Sec .
• Check the
Latch
check-box if you want the assertion of the rule to require a reset. If not,
leave the box unchecked.
• Check the
Log
check-box if you want the assertion of the rule to display an alarm and log
the event. If not, leave the box unchecked.