Nautel VS300, Руководство по эксплуатации и обслуживанию

Страница: 183 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-168 Issue 8.0 2016-03-01
Select output channel - AUI
You can configure remote outputs 1 through 16 to monitor a variety of alarm and status outputs.
Click the existing
Channel
bar to display the
Select a Remote
window (see . From this window,
select one of the channels, then click
Load
to accept:
•
Not Assigned
. No alarm or status parameter is monitored.
•
RF On/Off
. The active logic level indicates the transmitter’s RF power stage is on (enabled).
The inactive logic level indicates the transmitter’s RF power stage is off.
•
Remote
Enabled.
An active logic low level indicates remote control is enabled (i.e. local plus
remote). The inactive logic level indicates remote control is disabled.
•
Various Alarms
. The active logic level indicates that the selected alarm is occurring. Any
transmitter alarm can be selected as a remote output. Refer to the VS300 Troubleshooting
Manual for a description of each alarm.
•
Preset Status
(1-4 default). The active preset’s output will be indicated by a logic low. The
remaining, non-active preset outputs will be open collector.
Figure 2.143: Select a Remote (output window)
Configure output control logic - AUI
You can configure the active/inactive logic for each of the 16 remote outputs. Click the existing
Logic
bar to display the applicable drop-down menu options. Some remote output default examples:
if the selected channel is
RF On/Off
, the drop-down options are:
•
Output Low When RF On
. Logic ‘0’ (low) indicates the output is true (RF is on); Logic ‘1’
(high) indicates the output is false (RF is off).