Nautel NX50, Руководство по эксплуатации и обслуживанию, Страница: 68 / 166

NX50 Operations and Maintenance Manual Operating the transmitter
Page 2-50 Issue 3.3 2016-02-08
Activating Presets
In the
Transmitter
block in the AUI’s top banner, click the bar that contains the active preset name
and the drop-down arrow (see Figure 2.36 ). The
Activate Preset
window will appear, which contains
a list of all preset options. Click and highlight the desired preset and click the
Activate
button to
enable the preset as the transmitter’s active preset. Click the
Cancel
button to close this window.
Figure 2.36: Activate a Preset
Editing or Creating Presets
When the
Presets
page (see Figure 2.37 on page 2-56 through Figure 2.42 on page 2-57 ) is opened
from the menu, the
Current Settings
of the transmitter are displayed. They define the current
operational state of the transmitter.
Current Settings
can be edited and then immediately activated
by pressing the
Save
button.
To edit a saved preset, you must load that preset from the
Presets
page (see "Loading Presets", on
page 2-51 ). If the edited preset was active before it was edited, saving the preset will update the
preset, but the
Current Settings
will not change. To update the operation of the transmitter, re-
activate the preset through the top banner (see "Activating Presets", on page 2-50 ).
CLICK HERE TO
DISPLAY PRESET
SELECTION
OPTIONS