Nautel NX15, Руководство по устранению неисправностей

Страница: 9 / 274

NX25/NX15 Troubleshooting Manual Responding to alarms
Issue 5.0 2016-05-06 Page 1-1
Section 1: Responding to alarms
This section provides instructions you need when performing troubleshooting on the NX25/NX15
transmitter. This section includes the following topics:
• Corrective maintenance
• Electrostatic protection - see page 1-3
• Identifying an alarm - see page 1-4
• Responding to alarms - see page 1-41
• Troubleshooting RF power modules - see page 1-48
• Other Module Replacement Procedures - see page 1-40
If none of the procedures and alarms described in this section address your problem, contact Nautel
for assistance.
Corrective maintenance
Corrective maintenance procedures consist of identifying and correcting defects or deficiencies that
arise during transmitter operation. Local and/or remote alarm signals are generated when a
malfunction occurs. If an alarm condition is caused by a malfunction in the RF power stage, the
transmitter may maintain operation at a reduced RF output level. The nature of the fault – and station
policy – will dictate whether an immediate maintenance response is necessary. Fault analysis and
rectification may be conducted from three different levels, with a different technical competence level
required for each: on-air troubleshooting, remote or local, and off-air troubleshooting.
On-air troubleshooting
On-air troubleshooting can be performed from a remote location, or locally at the transmitter site.
CAUTION:
The transmitter contains many solid state devices that may be damaged if
subjected to excessive heat or high voltage transients. Every effort must be taken
to ensure that circuits are not overdriven or disconnected from their loads while
turned on.