Nautel NX100, Руководство по установке, Страница: 36 / 66

NX100 Installation Manual Installing audio inputs
Page 7-4 Issue 3.2 2017-03-31
Setting Exgine audio parameters
Use the transmitter’s AUI to set and adjust Exgine audio parameters as follows (refer also to the
Operating section of the
NX100 Operations and Maintenance Manual ):
From the AUI select
Menu -> User Settings -> Exgine Settings
. The menu in Figure 7.4 will appear.
Figure 7.4: Exgine Settings menu
– Select Protocol and enter Exgine IP settings (see the associated Exporter manual for
assistance).
From the AUI select
Menu -> Presets -> Digital Settings
. The menu in Figure 7.5 on page 7-5 will
appear.
– Set the IBOC Service Mode (MA1 for hybrid; MA3 for all-digital).
– Adjust carrier levels by changing the values of the Upper Primary Level Adjust and
Lower Primary Level Adjust fields.
– Adjust the analog gain by changing the value of the Analog Gain field.
– Set Digital Carriers to On or Off.
– Set Analog Transmission to On or Off.