Universal XactTrace
®
User Instructions
9
•
Hang the belt and cable on a hook. Do not fold the
belt or wrap the cable around the sensor.
•
To save battery power, disconnect the sensor from
the belt when not in use.
Cleaning
No part of the Universal XactTrace system requires sterilization.
•
Sensor and Cables.
Wipe clean with a hospital grade cleaner that is not
corrosive to plastic or metal, and then dry with a clean, dry cloth. Do not
immerse the sensor in liquid and avoid contact of the cleaning solution with
the connectors.
•
Belts.
Hand wash in a warm (not hot) solution of hospital grade laundry
detergent, and then air dry.
Disposal
According to the regulation in Europe on Waste of Electrical and
Electronic Equipment (WEEE) the WEEE may not be disposed of as
unsorted municipal waste. Return the WEEE (Universal XactTrace
sensor) to the Embla European Representative (see last page for
contact information).
The sensor contains a lithium battery and must be disposed of properly. Local,
state, or national laws may prohibit disposal of batteries in ordinary waste bins.
Contact your local waste authority for information regarding available recycling
and disposal options.
User Settings for Recording Equipment
XactTrace should be connected to recording equipment bipolar channels with a
full-scale range of ±6 mV or similar. User settings for patient-connected input
channels of the recording/monitoring equipment to which the Universal
XactTrace connects are described below.
•
Low Frequency Filter
– 0.1 Hz
•
High Frequency Filter
– 15 Hz
•
Sampling Rate (minimum recommended)
– 25 Hz
