Universal XactTrace
®
User Instructions
11
Category
Properties
Belt
Cotton with nylon-covered elastics and insulated wire. Does
not contain natural rubber latex.
Sensor Element
Printed circuit board with components and battery
Sensor Housing
Thermoplastic elastomers (TPE)
Cable
Two-lead unshielded cable with tinsel wires; terminated at the
recorder end with standard 1.5mm medical touchproof
connectors and at the sensor belt end with a two-pin, 1mm
medical safety touchproof (keyhole) female plug.
Snaps
Nickel-coated spring steel. Nickel is non-touchable during the
intended use.
Over-molding
Thermoplastic elastomers (TPE)
Safety & Standards Conformity
Description
Properties
Classification
Type
Internally powered equipment
Mode of
Operation
Continuous
Degree of
Safety
Equipment not suitable for use in presence
of a FLAMMABLE ANAESTHETIC
MIXTURE WITH AIR or WITH OXYGEN or
NITROUS OXIDE.
Ingress of
Liquids
Equipment classified as ordinary equipment
regarding ingress of liquids; that is, it is not
drip-proof, splash-proof or watertight.
Connect the Universal XactTrace only to recording/monitoring equipment with
patient-connected input channels that comply with IEC60601-1, type CF or BF.
