natus Photic Stimulator, Руководство пользователя и обслуживания

Страница: 10 / 24

Natus Photic Stimulator User & Service Manual
8
Unpacking
When you unpack your Natus Photic Stimulator, make sure the following items are included:

Photic Stimulator (p/n 10440)

PCI to Photic Stimulator 20ft Cable (p/n 003771)

Protektor to Photic Stimulator Cable (p/n 003632)

User & Service Manual
NOTE: The Photic Stimulator should be used only with cables, transducers, electrodes,
sensor, and switches that are supplied or approved by XLTEK .
Cable Option List
The 20ft cables are available with the specific end connector for the following devices:
Xltek PN Description
003771 PCI to Photic Stimulator Cable
003632 Protektor to Photic Stimulator Cable
012788 Photic Stimulator
– Grass Amplifiers Cable
W6473H Trex Cable for LED Photic Stimulator
580-PHTCB1 Photic Stimulator
– Netlink Cable
580-PHTCB3 Photic Stimulator
– XL Cable
Installation and Operation
WARNING: Never place the photic device on the floor.
1)
Place the photic device on a platform, table, cart, or other raised surface.
Never place the photic device on the floor.
2) Plug the photic device only into a power outlet marked and verified as Hospital Grade.
NOTE:
Acceptable ‘Hospital Grade’ power outlets must be labeled as such.
3)
On the XLTEK Connex, Brain Monitor, Brain Monitor ICU, EEG32U or EMU40 headbox ,
connect the mini-din 6-pin male end of trigger cable (XLTEK part number 003771) to the
Photic connector.
4) On the XLTEK Trex headbox , connect the Hirose connector of trigger cable (XLTEK part
number W6473H) to the Photic connector.
5)
On the XLTEK PCI computer-headbox interface card (used with EEG32, EMU40,
EMU128FS, Mobee and Hyppo headboxes), connect the mini-din 4-pin male end of trigger
cable (XLTEK part number 003771) to the matching connector on the PCI card.